EN
Vane pump Cartridge T6
1. With dowel pin vane structure, it can work in high pressure, low noise and long lifetime.
2. This vane pump can fit wide viscosity hydraulic medium and be started at low temperature and work at high temperature.
3. As the vane pump adopts bilabial structure vane, it has high oil polution resistance and wide speed scope.
- Feature
- Model code
- Related Products
High pressure and high performance dowel pin type vane pumps are widely used for plastic machinery, casting machinery, metallurgy machinery,pressing machinery, refining machinery, construction machinery, marine-Machinery.
Features
1. With dowel pin vane structure, it can work in high pressure, low noise and long lifetime.
2. This vane pump can fit wide viscosity hydreulic medium, and be started at low temperature and work at high tempereture.
3. As the vane pump adopts bilabial structure vane, it has high oil polution resistance and wide speed scope.
| Vane Pump | T6 |
| Application | Plastic machinery, casting machinery, metallurgymachinery, pressing machinery, refining machinery, construction machinery, marine-Machinery. |
| Displacement/Size |
T6C:03,05,06,08,10,12,14,17,20,22,25,28,31 T6D:14,17,20,24,28,31,35,38,42,45,50,61 T6E:42,45,50,52,57,62,66,72,85 |
| Control types | fixed displacement pumps |
| Max pressure | 2800 rpm |
| Material | cast iron |
| T6 Series-cartridge Model designation | |||||
| (F3-) | PC- | T6D | -45 | R | -10 |
| Note | Cartridge mark | Series | Flow code | Rotation | Design number |
|
No-marking:Petroleum seres oilemulsification fluidwater glycolfluid F3:phosphate esterfluid |
PC-Cartridge kit of Single pump double pump shaft end PCT-Cartridge kit of double pump coverend |
T6C | 03,05,06,08,10,12,14,17,20,22,25,28,31 | (Viewes form shaftend of pump)R-right hand for clockwiseL-left hand for counterclockwise | 10 |
| T6D | 14,17,20,24,28,31,35,38,42,45,50 | ||||
| T6E | 42,45,50,52,57,62,66,72,85 | ||||
| The data of relevant series, model are unanimous. Please see T6 series-single pumps data. | |||||
| Series | φA | B | C | 中D | E | φF | φG | H | K | M(Rubber washer) | N(Rubber washer) | φP | L | ||||
| T6C | 95.25 | 99.4 | 93.9 | 61.9 | 73.6 | 4.8 | 89.3 | 4.8 | 43.7 | 88.5x3.53 | 60X3.53 | 77.7 | 5.5 | ||||
| T6D | 123.03 | 132.4 | 125.8 | 71.9 | 103 | 8.7 | 108.3 | 6.4 | 41.2 | 107.5X3.53 | 69.5×3.53 | no step | |||||
| T6E | 143.12 | 150.3 | 14.25 | 88 | 112.7 | 10.8 | 136.8 | 7.9 | 49.2 | 136.1x3.53 | 85.3x3.53 | ||||||
| Series | Insidespline tooth outline parameter of rotor | ||||||||||||||||
| Number of teeth | Pitch | Pressure angle | Major diameter | Minor diameter | |||||||||||||
| T6C | 28 | 40/80 | 45° | 18.87 | 17.4 | ||||||||||||
| T6D | 25 | 2448 | 45° | 28.19 | 25.82 | ||||||||||||
| T6E | 34 | 24/48 | 45° | 37.72 | 35.35 | ||||||||||||
